Zhongtuo Roll Forming Machinery Co., ltd

Metal decking machine for Albania

Metal decking machine for Albania

Metal decking machine for Albania is designed for producing the metal decking by rolling forming machine.

In the following part, I will show you one type metal decking machine which we have delivered to Albania. If you have the needs like this, please contact us at any time. Here is the metal decking drawing profile for your reference:
Customer drawing profile:  material thickness Max to 1.2mm

Here is the finished product pictures for your reference:


Metal decking machine for Albania pictures for your reference:
  1. Processing flow diagram of machine
Manual decoiler→ → Feeding material into machine →Roll forming machine →Measure length →Hydraulic cutting →Finished Products
 
 
Technical parameters  
Main elements manual decoiler, guiding platform,main machine of roll forming, cutting device, electric motor,hydraulic station, PLC control system, run out table
Material Raw material S350 & S450 grade steel or galvanized coil
Thickness 0.5-1.2mm
Hydraulic Decoiler
 
Inner Diameter:450-550mm Expand by hydraulic
Outer Diameter: max 1500mm
Max Coil width:1250mm
Capacity: 5T
Leveling beach
With the embossing roller
For making coil neat and clean from decoiler, coil will be a little curve.
Meanwhile for saving coil, we will give motor shearing system to cut coil at any part.  The embossing roller shaft diameter=120mm.
Logo Punching If you need we can add this function for you.
Main Forming
machine
Forming steps 34  roller stations
Rolling method: for rolling methods, we use the separated molds rolling forming.
Shaft diameter 90mm, the embossing roller=120mm
Diameter 90mm
Design type Middle plate welded
Machine frame thickness 20mm
Machine frame 400# H steel welded
roller material 45# steel, surface hard chromium plating.
shaft material 45# steel adjusting the density
Work speed including shearing
 
8-12m/min
Transport By chains of 1.25mm
Power of main machine
 
18.5 kw   two motors to give the power more evenly to the machine
Shearing system Type of cutting power Hydraulic
Elements Two hydraulic jacks for fast shearing speed
Frame Pillar pole type to make sure working steady
Cutting blade material Gcr12, queening at 58 to 62 degree to make sure hardness and long time to use.
Cutting tolerance ±1mm
Cutter blade more pair We will give one more as spare part
Cutter quantity 2 set
Working pressure 20 MPA
Motor Brand Siemens 

More details of the machine pictures for your reference:
We have installed the punching station on the machine, then it is quite easier for installation. We also added the punching logo this machine.

For the leveling part, we add the mold protector holder and the brake for easy to feed coil and also have the good embossing effect.


For the metal decking machine, we have made more types, here are more drawing profiles for your reference. If you need to know more information,please contact us at any time.



 

Email to this supplier

Your message must be between 20-8000 characters

Related Products List